Wavemon management software is a unique client/ server application for network and local work stations. It basically consists of two parts: The server module of the UPS management software or UPSServ that communicates with the UPS via a RS-232 cable. The UPSServ collects the UPS messages, interprets and gives them to the client module of the s/w or otherwise UPSCii and the monitoring station (which operates based SNMP). Only a few of its network features include messaging for emergencies, remote management and multiple server shutdown via remote TCP / IP connection. Particularly for parallel UPS systems, each UPS module is provided with a slot for an optional SNMP card that allows independent monitoring. In addition to this solution, it is possible to integrate a more efficient – economical – choice where only one SNMP card is required for the entire parallel system and is called Multidrop Solution.
UPS WAVEMON offers:
- Automatic (non-supervised) master / slave closure in heterogeneous environments
- Countdown of residual time autonomy on screen
- Server disconnection and closing process on screen
- Extensive UPS data logging and time recording power quality
- Scheduled UPS features: economy mode, service mode, and other system status
- Graphical User Interaction Interface
- Automatic unattended local closure
- Special s / w modules for storing and closing MS OFFICE files.
- Compatible with WINDOWS, UNIX, OS / 2 DEC VMS, NOVELL, MAC
The units can be installed in parallel for redudancy and capacity upgrade.
BATTERY TEMPERATURE SENSOR
UPS can be paralleled for redudancy or capacity upgrade.
BATTERY TEMPERATURE SENSOR
Temperature sensor for controlling the temperature of the batteries.
Remote management via SNMP. It Offered as a slot or in a outside box. Also suitable for parallel system.
ALOGEN FREE CABLES
The UPS shall have halogen free cable. It is becoming relevance for the public sector (airports, rail/metro infrastructure) to protect against the risk of toxic and corrosive gas emissions during a fire or short circuit fault.
DRY CONTACTS CARD
Dry contact relay outputs for UPS management: Mains failure, load on inverter,battery low, common alarm.
CS121. For interfacing the UPS with the network without the need for additional sensors or interfaces. Available in slot and box formats. Supports the following protocols SNMP, Modbus TCP,HTTP ModBus TCP, Telnet FPT, SMTP (e-mail).
CS121Advanced. For interfacing UPS with the network and allowing users to connect additional sensors and I / O options either directly to the card or with sensor manager (temperature & humidity, alarm buzzer). Available in slot and box formats. Supports the following protocols HTTP, ModBus TCP ,SNMP Telnet FPT, SMTP (e-mail), ModBus RS-485.
CS121 modbus. For interfacing UPS with the network and the ModBus RS485 with option to connect alarms buzzers or additional relay board. Available in slot and box formats. Supports the following protocols HTTP, ModBus TCP ,SNMP Telnet FPT, SMTP (e-mail), ModBus RS-485.